Tach-Pak 3 - Digital Process Tachometer - NonIndicating

The AI-TEK Tach-Pak 3 computing tachometer is a single channel instrument. It measures input frequency and converts the resulting quantities to a meter output, an analog output and four relays.  The microcomputer based Tach-Pak 3 permits a combination of fast response and high accuracy.  The instrument functions can be easily programmed in the field or altered at any time using a unique internal switch design.

Typically, this instrument is used with magnetic sensors as a signal source.  However, it may receive a sine wave or TTL signal from any frequency source.

• Quick Response - 50 ms updates above 100Hz

• Digital Configuration - Utilizes adaptive period averaging & floating point calculation

• High accuracy.  =/-.5% for analog outputs & +/- .05% for relay setpoints.

• 2 Analog Current Outputs 0-1ma, 0-20ma, 4-20ma.

• Field Programmable - No additional calibration required

• 4 relays - Sealed 6 amp SPDT auto reset or latching

• AC or DC Power

• CSA Listed

The AI-TEK Tachtrol 2 speed/rate monitor is a single channel digital indicator.  It displays measured values in engineering units: RPM,FPM, frequency or other values.  This is an indicator only and does not have any output.Although the Tachtrol3 can handle all the requirements that were formely served by the tachtrol 2, you may find that you do not need all its features. If you need an indicator only, please contact us and we will assist you with appropriate selection of a product.

The AI-TEK Tachtrol 3 computing tachometer is a single or dual channel instrument. It measures input frequencies and displays the resulting quantities in RPM, FPM, %Draw or other rates.  Measurement using the period mode (time per event) permits a combination of fast response and high accuracy. 

• Single or dual channel

• 2 relay setpoints

• 9 computed functions

• 4-20 ma, 0-20ma outputs

• Measures speed or freq

• 0-10 VDC, 0-5VDC output

• Adjustable normalization

• RS232C serial output

• Active or passive sensor inputs

• Expanded & suppressed scale

• Autoranging LED display

• Optional housings

• AC or DC power Panel mount DIN housing

• Easily re-configured

• Functions indicators

• .05% display & relay accuracy

• Field adjustable

• MMIL 810C vibration & shock

• 0- 50C operating temperature